Nik’s Bumblebee Project started off in 2011 with the goal of getting to know these amazing, social creatures. As he learned more, he found that the bees documented behavioral patterns were different from observed behavioral patterns due to climate change and unusual weather conditions. Nik observed countless hours of camera footage and discovered that the Queen’s hibernation schedule has been completely disrupted leading to disaster of new bumblebees and subsequent pollination which is critical to our food supply. There are many reports of a decline in pollination and is of global significance.

Earlier this year, Nik added sensors and a gateway from ioBridge to help automate and collect more data generated by these busy bees. The bee boxes now monitor temperature, track movement, count bees, and provide real-time feedback from the bumblebees by being connected to the cloud. The project looks to be evolving as new sensors and ideas will be incorporated over time.

“ioBridge is a big step forward in allowing us to automate and correlate environmental and activity data without resorting to manual CCTV analysis,” said Nik in an email interview. “It gives us the freedom not only to view and collect the data from anywhere remotely,  but also share it and tweet it – again helping to raise awareness.”

Nik was able to capture a photo of the first tweet triggered by a Bumblebee.

And, here’s what she said…

We were so happy to find out about this project. We didn’t know much about Bumblebees and learned a lot by following Nik’s project. Thanks for sharing and we hope to do our part to help raise awareness of the global impact and never ending curiosity that bumblebees generate.

To get more info about the Bumblebee Project visit LoveBumbl.es and follow the project on Twitter.

Here’s a quick video introduction linked by Carecraft pool builders and retailers:

www.youtube.com/watch?v=np5ZaUU3ltk

Zodiac contacted us about creating a remote monitoring and control device for their pool and spa control systems. We worked with their engineering and marketing team to create a new product that incorporates Wi-Fi, Ethernet, USB, and RS-485 connectivity. We also extended our web services, created an API, and provided a streaming interface to monitor and control over 100k pool and spa systems efficiently. All of our combined efforts resulted in a highly secure, real-time, connected product that is targeted to pool professionals and consumers.

The pool and spa industry is highly competitive. By adding Internet-connectivity and many new features, companies like Zodiac are able to maintain their competitive edge. “It’s critically important to Zodiac and our Jandy Controls business to maintain our reputation for highly dependable, intuitive pool and spa automation,” said David Goldman, Director of Product Development at Zodiac. “We’re delighted to raise the bar yet again by incorporating ioBridge’s technology.”

And, we are thrilled as well to be working with innovative partners like Zodiac. We have many other projects like this going on under the hood and we love being able to share this one with you.

“We are extremely proud to have been chosen by Zodiac to provide connectivity technology for their new iAquaLink intelligent pool control system,” said Dr. Robert Mawrey, CEO of ioBridge. “The flexibility and accessibility of the ioBridge platform allows companies to enhance the value of their products. We believe that the iAquaLink is a wonderful example of an Internet-enabled product and that it provides a competitive edge that sets Zodiac apart from other pool and spa control system providers.”

Visit http://www.ioBridge.com for more applications and information on how ioBridge works with manufactures such as Zodiac.

[via ioBridge Press Release]

Last month Powercast put a live demo of their remote monitoring in the cloud solution on their website.  The layout below displays various Temperature, Humidity, Light and Carbon Dioxide sensors at different locations throughout the Powercast headquarters.

This is a great example of how ioBridge technology can be the missing piece of the puzzle in someone else’s solution.  We are seeing a growing level of interest from solution providers like Powercast that have their own existing technology, customers and applications.  We love these types of partnerships where our cloud connecting technology makes their solutions better and easier to manage.

The article in Scientific American and Fast Company titled How the “Internet of Things” Is Turning Cities Into Living Organism talks about how this solution is a great example of using “Internet of Things” to immediately affect the environments we live in. I especially enjoyed the analogy of the sensors in the city being the “virtual nervous system”.

“By using the Internet to connect real-world sensors and control mechanisms to cloud-based control systems that can pull in streams from any other data source, including weather reports, these efforts enable conservation and money-saving measures that would have been impossible without this virtual nervous system.”

(Even Chris Anderson of Wired / The Long Tail gave this definition of the Internet of Things a ringing endorsement.)

Why this is BIG for the Internet of Things

I feel like this is all just the tip of the iceberg for the “Internet of Things”.  Solving problems like stormwater management are proving that the “Internet of Things” has a big part in solving real world problems, not just tweeting toasters.

Here’s a recipe:

1) Existing data / trends / models (i.e. weather, tides, sunlight)

2) Real time data (i.e. temperature, pressure, humidity, light)

3) “Things” that need to be controlled (i.e. fans, valves, motors)

4) Platforms for the “Internet of Things” (like what ioBridge makes)

Take a few parts real-time data analysis with existing data / trends / model, decide how and when the things that need to be controlled should function, then mix moderately with a platform for the “Internet of Things”.  What can it be used for?  This recipe goes well with agriculture, infrastructure, energy, water…   In the end you’ll have a way to solve many large real-time problems.

As you can see, most of the components 1-3 have already existed for years.  It is the recent emergence of platforms for the “Internet of Things” that provides that last mile to connect it all together and makes  automatically solving real problems in real-time a reality.

Yeah… It’s kind of a big deal.

[via Scientific American / Fast Company / Wall Street Journal ]

First I’d like to give a thank you to all the attendees of ioBridge’s DCWEEK Internet of Things Workshop.  It was a great turnout even though it was one of the last events of a long week.

We accomplished all of our goals:

1. Explain to people what the “Internet of Things” is
2. Have everyone realize where it is in their everyday lives
3. Understand just how BIG it is going to be
4. Get people to experiment first hand with IoT
5. Get involved with the Washington, DC tech scene and contribute to DCWEEK 2011
6. Get people giddy like school children when they are controlling their own “Things” on the Internet!

All the attendees were very involved in the presentation.  It was great to see the wheels start to turn as they learned about basic digital and analog inputs/outputs.  Once they understood those concepts they started to see how seemingly complex devices like a touch screen could be broken down in to it’s basic inputs and outputs.

The hands on part of the workshop was very rewarding and we thought everyone had a lot of fun.  We brought ioBridge Dev Kits that include IO-204 and multiple buzzers, temperature sensors, buttons, servo motors and LCD screens for the attendees to play with.  Four separate groups got to go through the module setup process and begin interacting with their items through the Internet.  Once they got that down, it started to get a little creative.

One group used a combination of the temperature sensor and the buzzer to have a buzzer go off when a certain temperature was reached.  They monitored all the inputs and outputs right from the Internet.  Another group took it a step further and had their IO-204 tweet once a certain temperature was reached.  Once they got that down, they used a simple button to trigger a tweet.  Sort of like a motion detector tweeting when someone came into a room.

Here are some of the photos of everyone in action:

Perl + CGI changed the Internet back in the mid-90′s. This combo was the catalyst for the creation of dynamic web applications and paved the way for the “Web 2.0″. The next big movement is the Internet of Things. This is where web applications mash-up with sensors, devices, appliances, power meters, mobile phone, and social networking to form new applications. Perl sits in a great spot to “Script Things”. Perl is a high-level language that has the ability to interface with any API, server, back-end, and new things that come its way. This is often why Perl gets called the “Duct tape of the Internet”. Last year, Hans Scharler, of ioBridge, created a thermostat that regulates itself based on his location on Google Latitude. The scripting was all done in Perl and interfaced with ioBridge’s API to control the thermostat. A lot of new applications are possible.

Hans will return to PPW and hold a new session called Scripting Things. The idea behind this session is to start with the basics. You will learn about Digital I/O, Analog Values, Serial Data, and Web APIs. All of these topics are things that we take for granted and assume that everyone knows about. You will also learn how to pull everything together with Perl and scripting languages. The target audience is anyone looking to learn how to get started with the Internet of Things and create mashups with real-life things with virtual things.

Injunction with PPW, ioBridge will also be hosting an all day long Hardware Workshop at CMU on October 8, so you can apply your new knowledge right-away. The only thing you need to bring is your imagination. Everything else will be provided — sensors, hardware, Arduino boards, ioBridge modules, buttons, and LEDs. The location is on the 6th Floor of the Gates Hillman Complex right on the Carnegie Mellon Campus and is open to everyone. We look forward to seeing what you will create and/or inspire for the future of the Web of Things.

The Pittsburgh Perl Workshop
October 8–9, 2010

Carnegie Mellon University
Gates Hillman Complex
5000 Forbes Avenue
Pittsburgh, PA 15213

While at Remote Expo, we were able to grab some bits of video so that you could see our booth setup and see one of our consumer product demonstrations. One of our exhibits was a web-enabled garage door opener, designed for one of our customers, that features real-time control, integrated video feedback, and mobile and web application control. Here’s a quick video from Remote Monitoring & Control 2011 with introduction and demonstration by our CEO, Dr. Robert Mawrey.

www.youtube.com/watch?v=uUx-q0zh7ZA

Thanks to everyone that stopped by and thanks to the organizers for such a successful event! We enjoyed our visit to Nashville and look forward to working with the many people that we met at Remote 2011.

To use the new gauge widget, create an Analog Input Widget, External Monitor Widget, or Expression Widget, and select “Gauge” under the style option.

One of our many TideAlerts.com subscribers had the idea to “watch” the tide levels during Hurricane Irene. After analyzing the data, we observed something interesting. The period of the tides did not change, but the amplitudes (the high tide and low tide marks) were greatly exaggerated as Hurricane Irene passed through Cape Cod.

The ioBridge tide project is another example of how the Internet of Things is emerging. We started this project 3 years ago and it provides an extremely useful service and is only possible by aggregating tons of sensor data and sharing it with users, developers, and researchers. This application is based on open data from NOAA and users monitoring environmental information and tries to find more meaning than just being a collection site of data.

By the way, here is what the tides looked like during Hurricane Irene at one of our public monitoring sites:

The good news is that by the time Hurricane Irene made it to Massachusetts, the storm was weak and all of our tide sensor sites survived.

Check out the Technology Review article, Cape Cod is Tweeting, Thanks to the Internet of Things, for more information about our tide project or contact us at support@iobridge.com.

The charts have been upgraded to support many new features, including axis labeling, chart types, local timezone support, and enhanced browser compatibility. And here’s the best part… the new charts are available now.

The advanced charts have many new chart types available: Line, Spline, Step, Area, Column, and Bar. Depending on your application, you may find a chart type more suitable to represent the data. For example, if you are monitoring power or water, you may find that the Step or Column chart types convey more information at a glance. Now you have the perfect way to visualize your sensor data.

Visit the ioBridge Wiki to get more information on getting started with the new charts.

Let us know what you think. With our new charting platform, we have many new options at our disposal!

Our background was M2M. The founding team of ioBridge worked on far-reaching M2M applications such as remote monitoring of medical devices, SCADA applications for pump and well monitoring, Oil and Gas pipeline monitoring, and substation power monitoring for Smart Grid applications. When we founded ioBridge we wanted to take our experience with M2M and couple that with our big ideas that everything should be Internet-enabled. To reinvent M2M, we had to create a new platform. Once a machine is connected, truly connected, that machine can leverage web services and social networking to ultimately enable first-of-their-kind applications.

ioBridge consists of many parts in concert with web services:

• Real-time push messaging from device to web services, web services to devices
• Multiple ways to interface with devices
• Low-power wireless sensors (we still have tide sensors connected to the web for over 2 years)
• Widget and application builders
• Multiple ways to interface with external web applications
• Native support to interface with WeatherBug, Google Weather, NOAA, Google Calculator, Yahoo Financials, Twitter, ThingSpeak, FourSquare, FaceBook, and any open API via our ThingHTTP app.

As a result, the ioBridge platform enables real applications that solve many of the traditional issues with a polling style M2M or SCADA solutions. We take full advantage of connecting things to web services. The additional benefit is low-cost. Maybe the biggest disruption that we have seen is cost. Since you can buy our dev kit for less than $200 and get a free suite of web services, you can start building an app immediately. Cost also lowers the barrier to entry for a whole host of new M2M customers that previously were cost prohibited from taking advantage of M2M applications.

In a recent article from the Yankee Group, Parlez-vous M2M?, Emily Green includes ideas about where M2M is going and some input from Dr. Robert Mawrey, the CEO of ioBridge. She also mentions how we “internet-enabled” a cranberry bog. Emily will be releasing a follow-up interview with Dan Luechauer, a cranberry bog owner, who has a completely  automated, remotely controlled and monitored cranberry bog via ioBridge technology. (Emily – Thanks for including us in your post and we look forward to your future articles.)

We have 100′s of examples just like Dan’s cranbrery bog. We look forward to sharing more applications with you. Visit the ioBridge Pro Applications section of our website for the latest info and ways to get started with ioBridge.

Water Pressure Gauge Showing 9 bars

ioBridge IO-204 Module Connected to Sensors

Elad says this is his first step into the Internet of Things and learned a lot before he goes full-scale. “This operation, of connection stuff to the web is called Internet Of Things (IOT). The thing can be any device, even a toaster like this guy did connecting his toaster to Twitter (also done with an IO-204 module).”

Elad also wanted to share the discovery process and hold a contest. Elad’s contest is open to anyone that can correlate the data presented on his Water Simulation blog. You have until June 30, 2011 to figure it out. Visit Elad’s blog for more information or look him up on Twitter.

[via Water Simulation]

You can upgrade your modules over-the-web, by signing into the ioBridge.com Interface and selecting your module, then by clicking Details and Upgrade.

Here’s an overview of the new features:

• New Firmware – The new firmware adds support for a new variable space for 32-bit values and onboard set points. Other enhancements include wider support for network configurations such as ATM and Mobile Data Networks. We also added watch-dog timers in the event of module lockups.
• Variable Value Widget – Now you can control the variable value on your module. This means you can send values from a web service down to your module and use that value in your on-board rules. For eaxample, you could make a thermostat based on WeatherBug’s reported temperature.
• Widget Customizations – You can now change the hover label for chart widgets and the scaling on the analog gauge widgets. The Widget ID / Key is now prominently displayed on the widget editor. Chart widget times now display the users local time.
• Set Points – You can now compare input values to Variable Value 2 and create set points that can be changed.
• Additions to the Module Interface – You can now directly set the variable values from the interface. We have also added listeners for both sides of serial smart board traffic.
• HTTP POST Actions – This new feature allows you can send a custom HTTP POST as a server-side action. The new feature supports Basic Auth and the ability to customize a POST to any external service.
• Custom X10 Widget – Originally we supported X10 outlets through our web service. With this update, you can send custom X10 commands to support other X10 devices like thermostats.
• Data Feed API v2 – Updated the Data Feed API for the IO-204 and IO-204-PRO includes SSL support and a RESTful interface.

We look forward to seeing what you create with the new features. If any issues or questions arise, check our Wiki or feel free to contact us.

Hans Scharler, of ioBridge, set out to make his thermostat aware of his location and the weather forecast. His project started off simple - adjust the thermostat as he leaves and when he returns. His real goals were to return to a comfortable house despite his schedule and to save money.

Scharler has lots to say about the matter…

A preset heating/cooling schedule only works when you are on schedule. What if you come home late? You have been wasting energy. What if you come home early? You might find a cold house.

Hans taps into location and weather data via an Application Programming Interface (API). He tracks his location using the Google Latitude service on his mobile phone and reads in the weather forecast from WeatherBug. Based on his position and the current weather, the system automatically sets his thermostat which is connected to his web application by the ioBridge IO-204. The IO-204 sits on your home network and what ever is connected to the IO-204 now has access to the web and any of the ioBridge web services.

Location Aware Home Automation

What’s next for this project? How about multi-person tracking? How about a coffee pot controlled by location? How about an office building regulating its power use considering only the location of its employees!?

ioBridge will incorporate location-awareness as a Plug In to the web services. You will be able to drop in Google Latitude connectivity native to the ioBridge platform. Other APIs that you have access to are Yahoo Financials, Google Calculator, WeatherBug, Weather.com, Google Weather, NOAA, Digg (although the API access is broken at the time), and Twitter. The ioBridge Plug In feature will allow you to connect to any API, even ones that are not prepackaged for you. With access to so much information, plus the ability to monitor and control devices, who knows what you will come up with. We were able to make a real-life Digg counter in about 10 minutes. Stay tuned.

For other coverage of this project, visit ReadWriteWeb, and MIT’s Technology Review.

Hans has all of the project code on his web site and details on how he linked the Google Latitude, WeatherBug, and ioBridge APIs together to create his location-aware thermostat.

Here is the official press release via eRelease:

ioBridge Announces Funding and Commercial Contracts to Develop New Web-enabled Products and Services

MARLBOROUGH, MA – July 21, 2010 – ioBridge, Inc. (www.iobridge.com) sees rapid growth and announces series seed funding and multiple commercial contracts. ioBridge is the developer of Web-enabled hardware and cloud-based services and was recognized as providing one of the Top 10 Internet of Things Products for 2009 by ReadWriteWeb. ioBridge’s technology platform enables almost any device or thing to be monitored or controlled via the Internet.  The user base has grown very quickly, finding new applications for the flagship product, known as the ioBridge IO-204 monitor and control module. Users place the IO-204 on their network without setup and anything connected to the IO-204 is accessible securely via the Internet.

Users from around the world have created projects based on the IO-204 at their homes to remotely monitor fish tanks, open garage doors via a mobile phone, and report home energy use to social networks. Top technology magazines and Web sites, such as Popular Science, IEEE Spectrum, MIT’s Technology Review, and MAKE Magazine, featured ioBridge projects. The success of these projects attracted companies looking to use ioBridge hardware and engineering services to create new commercial products and use the technology for professional applications.

“Our inbox is filled with email from schools, businesses, and hobbyists alike looking to use our devices for their applications,” said Jason Winters, ioBridge’s President, Technology. “I am thrilled with the response.”

Over the past six months, ioBridge secured seed funding and landed commercial contracts for new consumer products and for a large scale environmental monitoring and control project. To support the growth, ioBridge added Robert Mawrey, Ph.D. as Chief Executive Officer and Hans Scharler as President, Software.

Robert Mawrey is the former Chief Information Officer of American Tower and brings with him twenty years of experience in electronic engineering, information technology, and strategic leadership. Robert holds a Ph.D. in Electronic Engineering from the University of Natal, Durban, South Africa.

Hans Scharler was formerly with TESSCO Technologies, where he designed and secured SCADA and Smart Grid networks for utilities. Prior to TESSCO, Hans released data management Web applications to manage learning programs and emergency response planning and reporting. Scharler is the co-author of “IP-based Physical Security” and holds lectures on network security and IP-based services.

ioBridge will be announcing the release of the ioBridge Professional Platform. The new platform includes hardware and Web services that will be available off-the-shelf to ease integration with consumer products and professional applications.

About ioBridge, Inc.

ioBridge, Inc. (www.iobridge.com) offers technology and services that enable almost anything to be Web-enabled and monitored and controlled over the Internet. ioBridge’s technology includes a Web services platform that customers can use to extend the technology for many applications.  ioBridge provides OEM and commercial integration services and licensing of core, patent-pending technologies.

###

Green Pond Tide Monitoring Site

Christopher Mims, journalist at the MIT Technology Review, writes, “We’re talking about the Internet of Things. Using an ultrasonic level sensor to bounce sound waves off the sea surface in order to determine its height, an XBee radio to send that data to a receiver on shore, and most importantly, an ioBridge IO-204 to relay that information to servers in the cloud, Cape Cod resident and ioBridge hobbyist Robert Mawrey is able to broadcast to his entire community near real-time data on actual sea level.”

The technology behind the tide monitoring sites is based around the ioBridge platform. We will be releasing our Pro hardware and web services soon available for commercial products and services. The tide alerts site is just one example of the new things we have in store.

We collect the data on our demo site for everyone to take a look at and sign up for email/SMS alerts. We will be opening up the feeds for others to build applications. Visit tidealerts.com to check it out.

Tide Level Charts

"Gonzo" loves his automated cat door

As with most projects, Rogier started searching the Internet and found some interesting projects. He got the idea to combine some of his favorite projects and make a remotely controlled cat door and alert system for his cat, “Gonzo”.

Here are some projects that inspired him:

• Flo Control
• Social Networking for My Toaster
• Twitter Enabled Cat Door

When the idea was there, the execution was very easy using the IObridge module and components.

Rogier installed a Cat Mate Cat Door in his basement. The cat door opens when the electromagnet senses a magnet in the cat’s collar. By running the sensor and switch over the the ioBridge IO-204, Rogier can be open and close the door remotely. He is also able to monitor  when the cat comes in and out of the door. The messages get pushed to Ping.fm via the IO-204 and ioBridge web service. Rogier and his neighbor follows his cat on Twitter @fellnasegonzo to make sure Gonzo is home safe and sound.

Cat Mate Automated Cat Door

Cat Door Switch and Sensor

Windows Mobile Cat Door Control App

Windows Home Server Interface

We had on display web-enabled robots, toys, and interactive projects created by the ioBridge community. Some of those projects included, an iPhone and Twitter controlled Donkey Kong, X10 controlled lamp, streaming temperature sensor, and a remote controlled dog treat dispenser.

While we were there, we captured some footage of our projects on display and exhibits that we were able to see. There were so many great projects and so little time. We made a quick YouTube video and posted pictures to the ioBridge Flickr group.

www.youtube.com/watch?v=UEgYWneVcKs

Thanks to all of the volunteers, exhibitors, and sponsors who made the Maker Faire NC such a success.

Looking forward to 2011!

Water Tank and ioBridge IO-204

ioBridge IO-204 with Temperature Sensors

Eric monitors and data logs the temperatures of the the hot water storage tank, the collectors, and the outside temperature in real-time using the ioBridge IO-204 and temperature sensors. This data allows Eric to calculate BTUs collected per day and translate into a dollar figure to track savings. He has surrounded himself with the data to make sure there is no system damage, freezing, etc., by creating a web site to view the data, setting ioBridge message alerts, and using a Google Gadget to display the temperatures collected by the IO-204.

Visit EJESolar.com to see a live view of the data collected by the solar hot water system as well as some more details behind this solar hot water heating system. Ingenious!

Screen Shot of Solar Array and Collected Data (EJESolar.com)

The IO-204 connects to your network and establishes a link to the ioBridge web services  in the “cloud”. From there you can control, monitor, and share by using a point-and-click design interface or through open APIs.

We have released a new firmware called C4.0 which allows you to go beyond the cloud. C4.0 is an explosion of new features. You can create projects and products that work with the network cable unplugged. Using the ioBridge.com interface, you design rules and synchronize those rules to the module. Now, with or without the Internet connection, the module can make on-board decisions, turn fans on, control your lights, and sound buzzers.

The C4.0 firmware also includes high-frequency pulse counting. You may be asking yourself, “Why does pulse counting matter?” Well, pulse counting allows you to track inputs that are going on/off, around, or up and down. You can count the revolutions of your power meter. If you know how many times it spins around, you know how much power you have used. You can count the revolutions of a windmill to calculate wind speed. This feature keeps counting even if your network connection is not available.

Here’s more great news…If you already have the IO-204, you can upgrade your module to the new firmware by clicking upgrade on the module section of the ioBridge.com interface. All new orders ship loaded with C4.0 so you get all of the new features right out of the gate.

Details regarding the new firmware are available in the ioBridge Wiki. We are excited to see what you come up with!

We have a steam powered steampunk pumpkin that blows smoke out if it’s ears. We have a spider dropping on it’s victim and snapping a photo and posting to Twitter via TwitPic. We also have a motion sensing, talking skull that scares co-workers in the owner’s cubicle. Check them out!

• Halloween Dropping Spider by Noel Portugal on My Electronics Notepad
• Jaw Dropping Skull (aka the Half Hour Hallow Hack) by Steve from Polymythic
• Steam Pumpkin by our own Hans Scharler of his personal blog called, “I am Shadowlord“

Well done guys. Thanks for your creative ideas and sharing your projects with the ioBridge community. And, Happy Halloween!

www.youtube.com/watch?v=HtpxKK6kfi4

PIR Sensors, Webcam, and ioBridge IO-204 Module

Noel was able to pull this off with using the ioBridge Actions. An action is logic created through the ioBridge interface that allows automated events to occur. For example, an action can cause a servo to move to preset position, send an email, update your Facebook status, etc. In Noel’s case, he use the output of the PIR sensor to cause the servo to move to a set position. The output of the PIR is digital – “high” means motion detected and “low” means no motion.

Using two PIRs covering two regions, he was able to detect motion in two regions. If motion is sensed in one area, the webcam points in that direction and if motion is detected in the other area, the servo moves the camera to cover the other region. Very clever.

Here is a video of the webcam tracking in action:

The PIR sensor has been the subject of a recent Adafruit tutorial – it’s available on the Adafruit store and even your local Radio Shack (of all places). For more information about this ioBridge project and other projects Noel dreams up, visit his blog.

Follow MattsOffice on Twitter

Matt’s Twitter application allows him to make updates to his Twitter feed and send commands to his IO-204 to turn on lights, send messages to his serial LCD screen, and get temperatures and light sensor readings. He also has a nifty extension that allows you to see a view from his office by sending him a tweet, which takes a snap shot from a digital camera and posts it on TwitPic.

Go ahead, follow MattsOffice and send Matt a message to his LCD screen – “@MattsOffice lcd Awesome ioBridge Project”. For more details, check out matthewmorey.com, a brilliant article on ReadWriteWeb, or YouTube video demonstration of the home automation project in action.

www.youtube.com/watch?v=PVm1VKB43ww